SP|KE (KŪBE mount)
$70.00
Our handcrafted KŪBE mount designed for stable dogstake flying in soft / deep turf that might not normally be secure enough for the standard pet screw mount, tapered high corrosion resistant steel really takes a pounding (2.5 lb to 3.5 lb dead blow hammer suggested). ** KŪBE not included **
These are handcrafted and assembled in small batches of 10-15 at a time, backordered SP|KE orders are generally fulfilled within 2-3 weeks.
Available on backorder
Description
SP|KE includes
- 22″ long steel spike (1/2″ diameter)
- Two split-C collar with knobs
- 3D printed mount (ready for KŪBE)
- Vinyl end cap to cover tip in storage
Features
- Professionally 3D printed mount
- Easy to use collar tightening knobs
- Long tapered spike tip for easier use
- Polished 416 stainless and aluminum
Important notes and warnings
- Please always regard the same warnings / caution disclosed on the KŪBE page.
- To state the obvious, this is a long, fairly sharp steel spike – handle and store it appropriately.
Additional information
| Weight | 24 oz |
|---|---|
| Dimensions | 21 × 3.5 × 2 in |
Reviews (1)
1 review for SP|KE (KŪBE mount)
| 5 star | 100% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Related products
Run your dual line kites hard or still learning how to fly? The Gaze is tough but to be prepared for anything, use this page to easily assemble your basic "ready for anything" package includes everything that could potentially and naturally break or wear out on the kite with a bad crash or extended use. Recommendations below!
Hand tied by John Barresi, these QUAD line sets are crafted to his specifications exactly the same as you'll find in his own kite bag, ready to hook up handles and go - the best quality line, field proven by top competitors, teams and performers for many years.
This product has multiple variants. The options may be chosen on the product page
Quite probably the #1 most used sun protection apparel in any kite flyer's bag. NOTE: If backordered, there may be some wait for us to order from the printer but all orders will eventually be fulfilled.
This product has multiple variants. The options may be chosen on the product page
Spike (or "nock") end cap used on the wing tip of the Gaze, complete with tensioner line - designed to provide good tip stabs even on firm earth or hard packed sand.
Beautiful 2″ x 2.88″ UV Vinyl sticker, great for laptops and bumpers.
Hand tied by John Barresi, these DUAL line sets are crafted to his specifications exactly the same as you'll find in his own kite bag, ready to hook up straps or handles and go - the best quality line, field proven by top competitors, teams and performers for many years.
This product has multiple variants. The options may be chosen on the product page
Run your Djinn hard or just learning how to fly? Use this page to easily assemble your basic "ready for anything" package includes everything that could potentially and naturally break or wear out on the kite with a bad crash or extended use. **
Tie-your-own kit for the Pro Leaders that come on our Djinn Pro Handles, comes in black or blue and includes an easy template for accuracy - kit includes FOUR pieces (2 sizes) with plenty of slack to easily tie a full leader set. Also feel free to use our free template image with cored 150# or 200# bridle line if you can source the material yourself.
This product has multiple variants. The options may be chosen on the product page
Kiteforge has updated and refined dog-stake flying with their new KUBE. The STAKE adds the ability to mount your KUBE in deeper or softer ground without the use of guywires. The original KUBE dog-stake mount works fine for most locations, and the SPIKE helps fill in the few blanks. One word of warning. The SPIKE is not approved for indoor flying. I tried hammering mine into the gymnasium floor and everyone went crazy.